Important Notes
Ford recommends the replacement of the pitman arm nut after each time it has been removed.
If installed on a truck with a top-mounted overload spring, an overload spacer block taller...
Important Notes
Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
Larger tires on stock wheels are not recommended due...
Built to Outperform take your Ford Super Duty diesel truck to the next level with this 7-inch radius arm lift kit with FOX 2.5 Performance Elite Coil-over shocks from BDS. Designed to improve stance...
Important Notes
Ford recommends the replacement of the pitman arm nut after each time it has been removed.
Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper...
Important Notes
Designed for Diesel models w/o top mounted overload rear springs
Models equipped with a 3-3/4" rear block from the factory do not require a rear block kit in order to achieve a more...
Important Notes
Coilovers are designed for diesel applications only.
Mounting larger tires on factory wheels is not recommended due to potential brake line clearance issues.
Factory track bar...
Important Notes
These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above...
Important Notes
Vehicles with radius arm mounted ride height sensors will require BDS123303.
Ford recommends the replacement of the pitman arm nut after each time it has been removed.
Use a small...
Important Notes
If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (pn# 123402)
38 x 13.50 tires may require minor trimming.
Some models may be factory equipped...