BDS Suspension

BDS 5 Inch Lift Kit | Toyota Tundra (22-25) 4WD

SKU: BDS839PSS
UPC: 840416433517
Condition: New
$4,702.27

Free Shipping to Continental US

Important Notes

  1. TRD Sports will achieve thesame amount of lift but willhave a lower stance than othermodels in the front
  2. Will not work with AdaptiveVariable Suspension (AVS)System equipped vehicles
  3. Will not work with Air Ridemodels
  4. Will not work with TRD Promodels
  5. For regular off-road use, it recommended to upgrade Non TRD Off-Road trucks half axles (CVs) to Toyota TRD's (Driver Part# 434200C020, Passenger Part# 434100C020. Not including TRD Pro models.
  6. The ADAS system in somevehicles needs to be recalibratedby a certified shop. The vehiclemay warn the driver of potentialcollision from lower bridges,overhead signs/wires, and signs inwindy conditions. Most windshieldrepair shops (Safelite) and dealersare capable of doing this
  7. Wheel&Tire Combos were tested through normal driving conditions within alignment specs.Some models will required: removal of mud flaps, fender liner being trimmed or resecured,body mount bump being cut off or ground down** Some 37" tires with 5-5.5" BS wheels may rub the sway bar during full lock turningsituations. 

Features

  • FOX 2.5 Performance Eliteseries coil-overs and choice ofFOX 2.0 or 2.5 (PE) rear shocksfor improved ride quality,performance, and capability
  • High clearancecrossmember designmaximizes groundclearance
  • Robust steering knuckles andtie rod ends maintain ESCsystem compliance
  • Fullwidth mult-piece skid platesystem improved offroadprotection
  • Progressive rate rear coil springsimprove ride quality, load capacityand suspension travel
  • Factory ProtectionPlus drivetrainwarranty included

Manufacturer's Description

Get the ultimate look and performance for your late-model Toyota Tundra with the BDS 5-inch suspension lift kit, featuring FOX 2.5 Performance Elite (PE) coil-overs and shocks. These kits feature the new aluminumbodied FOX 2.5 Performance Elite (PE) coil-over shocks, designed specifically for bolt-on performance, increased travel, more adjustability via DSC adjustment, and better heat dispersion, allowing you to tackle theroughest terrain on and off-road. Designed to improve stance, performance, and capability, BDS includes everything necessary to set your truck up right with clearance for up to 37-inch tires.

This kit takes advantage of BDS's tried-and-true high-clearance architecture for improved ground clearance, strength, and off-road protection, while correcting suspension and steering geometry for great on-roadhandling characteristics. Up front, this kit pairs the FOX 2.5 PE coil-overs with high-arched, 1/4-inch thick steel crossmembers, while properly relocating the front differential to correct CV operating angles and protect itwith heavy-duty, laser-cut skid plates featuring the iconic tri-color stripe backing plate. Steering geometry is corrected at the new, taller ride height with CNC-machined ductile iron steering knuckles, along with highstrength tie rod ends, allowing for improved control and ESC system compatibility. These, combined with the provided sway bar drops, bump stop extensions, brake line brackets, FOX reservoir mounts, and suppliedhardware packs, provide a comprehensive front suspension lift ready for whatever you throw at it.In the rear, this kit utilizes a pair of ProRide coil springs, a track bar relocation bracket, extended sway bar links, and control arm brackets to lift and level the stance while maintaining suspension geometry and loadcapacity. For shocks, you have the option of FOX 2.0 IFP Performance Series gas shocks or an upgrade to the FOX 2.5 Performance Elite (PE) Series piggyback reservoir shocks to match the front and further enhancevehicle performance and adjustability.

FOX 2.5 PE Coil-Overs

FOX 2.5 Performance Elite (PE) coil-overs offer next-level performance for both on-road comfort and off-road capability. Tuned and ready to install right out of the box, these aluminum-bodied FOX 2.5-inch diametercoil-overs are the latest iteration of FOX suspension technology, built for durability. Their lighter design, better heat dispersion, and race-proven components make them the best all-around product. These include DSC(Dual Speed Compression) adjusters on the remote reservoir for additional fluid capacity and high-speed/low-speed compression tuning, allowing you to easily dial in performance to match any terrain with the turn ofthe knobs.

HD Components

All BDS kits come with a No Fine Print Warranty, and to ensure our kits are the best they can be, we use high-strength American steel, high-clearance, fully welded crossmembers, the latest manufacturing processes,and quality inspection at every step of the way. Get the most out of your truck with BDS Suspension and FOX.

Options

Rear Shock Option

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

FOX 2.5 Performance Elite Series

  • Increased off-road capabilities
  • Easily adjust your shock for terrain, load and speed
  • 2.5-inch Impact extruded aluminum body
  • Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
  • External reservoir design separates shock oil from the high-pressure nitrogen
  • DSC - Dual Speed Compression Adjuster comes standard
  • Fully serviceable for a lifetime of use
  • 1-year Manufacturer's Warranty

Product Specs

SKU: BDS839PSS
UPC: 840416433517
Condition: New
Front Lift Height:

5

4"
Front Lift Method: Coil-Over
Rear Lift Height:

4

5"
Rear Lift Method: Coil Spring
Recommended Tires & Wheels:

37 x 12.5 with 18 x 9 and 5 in. Backspace

37 x 12.5 with 20 x 9 and 5-6 in. Backspace <li>37 x 12.5 with 18 x 9 and 5 in. backspace</li> <li>37 x 12.5 with 20 x 9 and 5"-6" in. backspace</li> <li>37 x 12.5 with 20 x 9 and 5.6 in. backspace</li>
Shocks Included:

No

Yes
Part Type: Suspension Lift Kit
Variant Position: 1

Installation Details

Installation Time 8-10 hrs
Installation Difficulty Very Diffcult