Although extremely rare, front and/or rear drive-line vibration may occur and require drive-line modification.
Factory wheels fit when paired with factory / original equipment tire size.
This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
This lift will require replacing your truck's factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Features & Benefits
Full length replacement coil springs add additional ride height while maintaining ride quality.
Heavy-duty track bar re-centers front axle, adds strength and limits lateral movement.
High-strength, 1/4" steel construction radius arms correct caster, improves tire clearance, and maximizes ground clearance.
High-strength, black e-coated U-bolts.
Rear lift block and longer U-bolts for easy installation and level stance.
Important Notes
Removal of factory block required. Net rear lift height will vary depending on the height of the factory block but will result in a level stance.
Front exhaust modification may be...
Important Notes
Front exhaust modification may be required to clear the front drive shaft (gas only).
If equipped with a 2-piece driveshaft, a driveshaft alignment kit may be required.
Although...
Important Notes
Removal of factory block required. Net rear lift height will vary depending on the height of the factory block but will result in a level stance.
If equipped with a 2-piece...
Important Notes
Designed for Diesel models w/o top mounted overload rear springs U bolts for trucks with overloads required, part# UBT4028 (Qty 4)
Models equipped with a 3-3/4" rear block from...
Important Notes
Removal of factory block required. Rear add a leaf is required for models equipped with factory 3-7/8" block for level to tail high stance. Single add-a-leaf kit # 113218 recommended...