Dually applications will require different rear 3-7/8" I.D. u-bolts.
Will not fit vehicles manufactured before 3-1-1999 with 5/8" track bar bolt head size.
Vehicles equipped with 2 piece rear driveshafts may require the carrier bearing to be lowered.
If vehicle is equipped with rear top mounted overload springs 4 of u-bolt part number UBT4035 may be required. Selecting the Ubolt option below will add four (4) UBT4035s to the base kit.
Trucks equiped with gas engine may achieve a slightly higher front stance.
If truck is equipped with curved/radiussed style front ubolts order kit # F1. If truck is equipped with square style front ubolts order kit # F2
Features & Benefits
New front leaf springs with bolt style leaf alignment clamps, anti-friction pads, OE style rubber bushings and tapered leaves for long term performance and great ride qualtiy
1-1/4".
Solid steel track bar with urethane mounts to properly center the axle
New front & Rear U-bolt with high nuts & washers
Rear 3" Block kit
Important NotesDually applications will require different rear 3-7/8" I.D. u-bolts.
Will not fit vehicles manufactured before 3-1-1999 with 5/8" track bar bolt head size.
Vehicles equipped with 2...
Important NotesWill not fit vehicles manufactured before 03/01/1999
May need front drive-line modification.Dually applications will require different rear u-bolts
Gas models will net more lift in the...
Important NotesWill not fit vehicles manufactured before 03/01/1999
May need front drive-line modification.Dually applications will require different rear u-bolts
Gas models will net more lift in the...
Does your leaf sprung Ford need a little extra boost? This 1" front shackle kit is designed to provide additional ride height without affecting ride quality or handling.
Important NotesWill not fit vehicles manufactured before 3/1/1999 with 5/8" track bar bolt head size.Check your front U-bolts to see if they are curved or square to choose the proper option for your...
Important Notes37x12.50 tires may require minor trimming. Factory wheels fit when paired with factory / original equipment tire size.
Two-piece rear drive shaft? Add a carrier bearing drop kit to...
Important NotesAlthough extremely rare, front and/or rear drive-line vibration may occur and require drive-line modification.
Factory wheels fit when paired with factory / original equipment tire...