sale
Zone 5 Inch Lift Kit | 2010-2013 Ram 2500/3500 4WD - 4 Inch Rear Axle
Zone 5 Inch Lift Kit | 2010-2013 Ram 2500/3500 4WD - 4 Inch Rear Axle
Zone 5 Inch Lift Kit | 2010-2013 Ram 2500/3500 4WD - 4 Inch Rear Axle

Zone Offroad

Zone 5 Inch Lift Kit | 2010-2013 Ram 2500/3500 4WD - 4 Inch Rear Axle

SKU: FQMS-ZOND18
Sale Price: $873.59
Price: $970.65
Hurry up! Current stock:

Free Shipping to Continental US

Product Details  

Important Notes

  1. Will work with Power Wagon models with the addition of sway bar link kit D5301.
  2. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 3" over stock.
  3. This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
  4. Factory wheels fit when paired with factory / original equipment tire size.
  5. This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  6. Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
  7. These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
  8. This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
  9. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift drive-line angles and avoid / eliminate driveshaft vibration.

Features & Benefits

  • 100% bolt-on design for easy installation.
  • Bump stop extensions properly limit up-travel, protecting your vehicle.
  • Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
  • Heavy-duty front track bar bracket correctly positions front axle under vehicle.
  • Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.

Shipping & Returns  
Fitment

Product Specs

SKU: FQMS-ZOND18
Width: 40.00 (in)
Height: 24.00 (in)
Depth: 48.00 (in)
Accommodates Factory Wheels: See Notes
Adjustable: No
Back Spacing: 5"
Back Spacing 3: 5"
Finish: Powdercoat
Front Lift Height: 5"
Front Lift Method: Coil Springs
Lift Type: Lift Kit
Max Tire Size: 35 x 12.5
Rear Lift Height: 3"
Rear Lift Method: Cast Blocks
Wheel Size: 17 x 9
Wheel Size 2: 18 x 9
Wheel Size 3: 20 x 9

Installation Details

Installation Time 6 hrs
Installation Difficulty 2 out of 5
Requires Welding No
Requires Metal Cutting No