If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need ZOND8404 also with your kit.
This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Although rare, if you experience front drive-line vibration, install the optional transfer case indexing ring.
Factory wheels fit when paired with factory / original equipment tire size.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift drive-line angles and avoid / eliminate driveshaft vibration.
Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
Features & Benefits
100% bolt-on design for easy installation.
High-strength control arm relocation brackets correct suspension geometry and add rigidity.
Important Notes
Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4068.
Power Wagon applications require sway bar link kit #122401. The Power Wagon...
Important Notes
Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4068.
Power Wagon applications require sway bar link kit #122401. The Power Wagon...
Important Notes
Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4068.
Although unusual, if driveline vibration occurs, order appropriate transfer...
Important NotesIf your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need ZOND8404 also with your kit.
This truck was produced using rear...
Important Notes
Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4068.
Although unusual, if driveline vibration occurs, order appropriate transfer...
Important NotesIf your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need ZOND8404 also with your kit.
This truck was produced using rear...
Important NotesWill work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 4" over stock...
Important NotesWill work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 4" over stock...
Important Notes
Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require u-bolt 4068.
Power Wagon applications require sway bar link kit #122401. The Power Wagon...