Will work with Power Wagon models with the addition of sway bar link kit D5301.
Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 4" over stock.
This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Although rare, if you experience front drive-line vibration, install the optional transfer case indexing ring.
This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
Works on 2013 2500 with 4 link front suspension only.
Will not fit 1 Ton Trucks.
Features & Benefits
100% bolt-on design for easy installation.
High-strength control arm relocation brackets correct suspension geometry and add rigidity.
Important NotesWill work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 4" over stock...
Important NotesDiesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended.
Although rare, if...
Important NotesWill not fit Power Wagon models due to the factory equipped 2" lift.
Will NOT fit RWD models.Features & Benefits100% bolt-on design for easy installation.
Finished in durable...
Important NotesThis truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Although rare, if you...
Important NotesThis truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Although rare, if you...
Important NotesCheck Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
This...
Important NotesThis truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. This kit is not designed for...
Important NotesIf your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need ZOND8404 also with your kit.
This truck was produced using rear...
Important NotesWill work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 3" over stock...